Electronic Locking &
Access Control Products
Price Book
List
Electromagnetic
Locks
Electric
Strikes
Electromechanical
Locks
Delay Egress
Locks
Magnetic Door
Holders
Access
Controls
Exit
Controls
Request-to-Exit
Bars
Power
Supplies
Consoles Mounting
Accessories
Communicating
Bathroom Systems
Miscellaneous

View previous campaigns.

View Cart  | Shipping 
 | Tax 
 | Terms 
 Request Quote  0 Items 
All Categories > Access Controls > 7400 Series Digital Keypad - Single Gang Box Mounting > Item # 7400  
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # 7400, 7400 Series Digital Keypad - Single Gang Box Mounting-3x4 Matrix Keypad



7400 Series Digital Keypad - Single Gang Box Mounting

larger image
The DynaLock 7400 durable keypad that is designed to be the most cost effective access control solution for indoor and outdoor residential, commercial and institutional applications. It will store 1 to 500 user PIN codes, with up to three access levels for each.

The 7400 features a user-friendly setup menu, which makes configuration and use very simple for end users. A wide array of functions and auxiliary modes provide extra flexibility and security, allowing it to operate as a single or two-door access controller.

The 7400 incorporates a UV-resistant, epoxy sealed polycarbonate housing, designed to withstand the elements. Red backlit keys enhance visibility in lowlight conditions and a flexible power input allows the unit to operate on 12-24VDC or 16-24VAC. Two Form-C relay outputs, rated at 2 Amps, as well as REX and Auxiliary inputs are provided.
  • IP65 Water Resistant & UV Resistant
  • Up To 500 User Codes
  • Suitable for Gang Box installations
  • Built In Tamper Detection
  • Backlit Keypad
  • Lifetime Warranty



Mechanical · Electrical · Environmental · Operational · Standard Features

Mechanical

L - Dimension

2.80 in

H - Dimension

4.72 in

W - Dimension

1.17 in

Weight

0.54 lb

Material

Polycarbonate
7400 Series Digital Keypad - Single Gang Box Mounting_Offset

larger image

Cable

18AWG/10-Conductor, 3 Ft. Long


Electrical

Voltage

12-24VDC, From regulated power supply
16-24VAC, From a transformer

Input Current

Maximum: 125mA at 12VDC
Standby: 75mA at 12VDC

Relay Outputs

Auxiliary: 2A Form C, N.O. and N.C.
Lock Strike: 2A Form C, N.O. and N.C.

Tamper

O.C. active low 32mA max sink current
Optical back tamper sensor

Inputs

10 programmable modes
Auxiliary (In/Monitor): N.O. dry contact
REX: N.O. dry contact


Environmental

Operation

Water resistant, suitable for outdoor use Meets IP65

Temperature

-30°C to 65°C ( -22°F to 150°F )

Humidity

0 to 95% (non-condensing)

RFI Protection

>20V/m up to 1000Mhz


Operational

Capacity

500 users, single/dual code for each

Keypad

3x4 keys for local programming and 4 to 8 digit PIN code entry

User Levels

Normal/Secure/Master


Standard Features
  • 500 User Codes: Up to 500 codes can be programmed using one of two easy enrolling methods.
  • Flexible Power Input: 12-24 VDC or 16-24VAC.
  • 3 User and Access Levels: Program one to three different levels of access for each individual user or for the entire system.
  • Multiple Inputs and Outputs: Unit includes a REX and Auxiliary input as well as two form C outputs rated at 2 Amps.
  • Audio and Visual Recognition: Equipped with an internal sounder and two tri-colored status/programming LED’s.
  • Multiple Auxiliary Modes: Ten programmable auxiliary modes including: Door Ajar, Forced Door, Alarm Shunt, and Door Monitor.
  • Weather Resistant: IP65 water and UV resistant.
  • Vandal Resistant: Built in optical tamper sensor.
  • Installer Friendly: Includes an installation kit and self-adhesive mounting template.
  • Lifetime Warranty




 DOWNLOADS 

 width= 7400-Brochure
(PDF, 645KB)

 width= 7400-7450 Installation Manual
(PDF, 567KB)

 width= 7400-7450 Quick Start Guide
(PDF, 186KB)


Request Information
DynaLock Corporation