By Part Number
Electronic Locking &
Access Control Products
Price List Book
View previous campaigns.
Item # 7300
Email This Page
Save To Favorites
Item # 7300, 7300 Series Digital Keypad - Single Gang Box Mounting-3x4 Matrix Keypad
The rugged DynaLock 7300 vandal-resistant, stand alone keypad is designed to be a cost effective access solution for harsh industrial, institutional and commercial environments. It will store 1 to 500 user PIN codes, with up to three access levels for each.
The 7300 features a user-friendly setup menu, which makes configuration and use very simple for end-users. A wide array of functions and auxiliary modes provide extra flexibility and security, allowing it to operate as a single or two-door access controller. The 7300 is completely epoxy filled and incorporates a sturdy, metal, vandal-resistant casing.
The sealed, all metal piezoelectric keypad is easy to clean and ideal for a wide spectrum of applications, ranging from hospitals to mass transportation. A flexible power input allows the unit to operate on 12-24VDC or 16-24VAC. Two Form-C relay outputs, rated at 2 amps, as well as REX and Auxiliary inputs are provided.
Weather and Vandal Resistant
Highly Sensitive Piezoelectric Keypad
Up to 500 User Codes
Built In Tamper Detection
Single-Gang Box Mounting
L - Dimension
H - Dimension
W - Dimension
18 AWG/10-Conductor, 3 Ft. Long
12 to 24 VDC, From regulated power supply
16 to 24 VAC, From a transformer
Maximum Current Draw
90 mA at 12 VDC
Standby Current Draw
35 mA at 12 VDC
Auxiliary: 3A Form C, N.O. and N.C.
Lock Strike: 3A Form C, N.O. and N.C.
O.C. active low 32 mA max sink current
Optical back tamper sensor
10 programmable modes
Auxiliary (In/Monitor): N.O. dry contact
REX: N.O. dry contact
Water resistant, suitable for outdoor use Meets IP65
-40 to 65
-40 to 150
0 to 95% (Non-Condensing)
>20 V/m up to 1000 Mhz
500 users, single/dual code for each
3 x 4 key pad for local programming and 4 to 8 digit PIN code entry
500 User Codes
: Up to 500 codes can be programmed using one of two easy enrolling methods.
Flexible Power Input
: 12-24 VDC or 16-24VAC.
3 User and Access Levels
: Program one to three different levels of access for each individual user or for the entire system.
Multiple Inputs and Outputs
: Unit includes a REX and Auxiliary input as well as two form C outputs rated at 2 Amps.
Audio and Visual Recognition
: Equipped with an internal sounder and two tri-colored status/programming LED’s.
Multiple Auxiliary Modes
: Ten programmable auxiliary modes including: Door Ajar, Forced Door, Alarm Shunt, and Door Monitor.
: Fully sealed metal enclosure, built to withstand the elements.
: Built in optical tamper sensor.
: Includes an installation kit and self-adhesive mounting template.
Brochure for 7300 Series Digital Keypad - Single Gang Box Mounting
7300-7350 Installation Manual
7300-7350 Quick Start Guide
705 Emmett Street, Bristol, CT 06010
Phone: 860.582.4761 Fax: 860.585.0338
INTEGRATED SECURITY SYSTEMS
Terms & Conditions
| Site created by
Thomas Web Solutions
and powered by