By Part Number
Electronic Locking &
Access Control Products
Price List Book
View previous campaigns.
Item # 6420
Email This Page
Save To Favorites
Item # 6420, 6420 Series Passive Infrared Request-To-Exit Sensor
List Price $150.00
The DynaLock Series 6420 passive infrared Request-To-Exit sensor detects the differential between a human body and the floor. Featuring a dual-pyroelectric design, for increased stability against external light, the 6420’s pyramid-shaped detection field is positionable from straight-down vertical to 35° in front of the door and special circuitry provides high immunity to RFI and other electrical noise. Two, built-in SPDT dry relay output contacts are rated for 1 Amp @ 30VDC and an adjustable timer may be set for from 0.25 to 60 seconds of relay hold time. Additionally, the output relay’s mode may be set for fail-safe or fail-secure operation and an on-board LED indicator may be set to illuminate during relay hold time.
The 6420 accepts 12 to 24 VAC/VDC input power and is designed for wall, ceiling or door frame mounting. It is ideally suited for access control, lock release, alarm shunting and automatic door operation.
Selectable Input Voltage
Single or Double Door Coverage
Two Relay Output Contacts
Adjustable Relay Hold Time
13’ (4 m) Max Mounting Height
Single Door Or Double Door, Selectable Pattern
Adjustable Range: Wall Mount Vertically 35°
Adjustable Range: Overhead Mount Vertically 20°
2 to 24 VDC (Non Palarity)
12 to 24 VAC (50 hz/60 hz)
40 mA or Less/DC
70 mA or Less/AC
Dry Contact Relay (2) SPDT
Operation Hold Time: Adjustable 0.25 Sec to 60 Sec
Contact Capacity: 30V (DC) 1A or Less
125V (AC) 0.6A or Less
Selectable Relay Operation: Fail Safe or Fail Secure
Operation: Synchronous Dry Contact Relay (Led Disabled)
+14 to +122
-10 to +50
Under Frame (Indoor)
White Body (ABS Resin)
White Window (PE Resin)
Cover Lock Screw (1 pcs)
Resistor (1 pcs) Connect when Operated at AC20 to 24V (82 Ohms, 3W)
Tapping Screw (2 pcs)
When Operated at AC20 to 24V Connect Attached Resistor
Adjustable Coverage Area:
Angle adjustment from straight-down vertical to 35° in front of door.
Single or Double Door Coverage:
Adjustable, two-position mirror.
Two SPDT Relay Output Contacts:
Rated 1 Amp @ 30VDC.
Adjustable Relay Timer:
Adjusts for 0.25 to 60 seconds of relay hold time.
Fail-Safe or Fail-Secure Relay Mode:
Paintable, Snap-on Housing Cover:
Easy to install and service, with built-in wire trough.
Selectable Input Voltage:
Accepts 12 to 24 VAC/VDC.
5 Year Limited Warranty
Brochure for 6420 Series Passive Infrared Request-To-Exit Sensor
Installation Manual for 6420 Series Passive Infrared Request-To-Exit Sensor
705 Emmett Street, Bristol, CT 06010
Phone: 860.582.4761 Fax: 860.585.0338
INTEGRATED SECURITY SYSTEMS
Terms & Conditions
| Site created by
Thomas Web Solutions
and powered by