Electronic Locking &
Access Control Products
Product Catalog Price List Book Electromagnetic
Locks
Electric
Strikes
Electromechanical
Locks
Delay Egress
Locks
Magnetic Door
Holders
Access
Controls
Exit
Controls
Request-to-Exit
Bars
Power
Supplies
Consoles Mounting
Accessories
Communicating
Bathroom Systems
Miscellaneous

View previous campaigns.

View RFQs  | Shipping 
 | Tax 
 | Terms
 Request Quote 0 Items
All Categories > Request-to-Exit Bars > 6451 Series Exit Sensor Bar > Item # 66451-42-US28  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Quote

Item # 66451-42-US28, 6451 Series Exit Sensor Bar



The non-latching 6451 Exit Sensor Bar offers immediate “no prior knowledge” egress by pushing on the bar at any point, with 15 Lbs. or less pressure.

A light touch is all that is required to activate one or both internal optical sensors designed to detect an exit attempt. A built-in mechanical switch is also included as a redundant back-up release.

Dual sensors, fail-safe electronics and successful testing in excess of one million cycles offer the user unparalleled reliability and low maintenance costs.

Installation is simple. Complicated tune-in procedure and frequent call-backs for readjustment are not required.

Releases an electric lock when activated by any means including:
  • Touch
  • Shopping Carts
  • Gurneys
  • Wheelchairs
  • Any other device
All models for doors with 5/8” or less frame stop. Actual bar length is 2” less than width of door x 2-3/8”H x 2-7/16”D Distance between mounting holes is 2-3/4” less than width of door.





Specification  · Mechanical  · Electrical Specifications  · Power Transfer  · Standard Features

Specification

Series

Exit Sensor Bar

Finish

Standard-Satin Aluminum


Mechanical

Bar Length

42 in

Bar Width

2 7/16 in

Bar Projection

2 3/8 in

Maximum Operating Force

15 lb

Operating Temperature

-10 to 120 ºF

Life Expectancy

1,000,000 Cycles Minimum

Construction

Aluminum

Warranty

Lifetime


Electrical Specifications

Maximum Current Draw

100 mA

Terminations

Removable Terminal Block

Exit Sensors

Dual Photo-optical, Mechanical Back-up


Power Transfer

Cable

5/16” Dia. x 18” Steel Flex Cable, Less Wires


Standard Features
  • Optical sensing electronics controlling lock and signal functions have no moving parts to wear out.
  • Built-in redundant mechanical switch for back-up release.
  • No tune-in required - complicated calibration and fine tuning are unnecessary and return calls are eliminated.
  • Three standard bar lengths are offered - bar may be field or factory cut to suit special applications (See CLC Option).
  • Bar may be activated by anything - human touch, briefcase, cane, wheelchair, etc. will activate the 6451. Ideal for ADA compliant installations.
  • Weather resistant electronics - conformal coated circuitry resists moisture damage.
  • All-metal construction - the entire bar, including end caps, is made of aircraft-grade aluminum, offering high resistance to abuse and vandalism.
  • Armored power transfer cord - furnished standard.
  • Dual output standard - DPDT contacts provide lock control and alarm shunting capabilities.
  • Built-in spike suppression - all input/output terminals are protected from line spikes.
  • Variable input power - operating voltage 12 to 24 VAC/VDC.
  • Architectural finishes - US28 satin aluminum is standard. US10B dark bronze and US4 satin brass also available. Entire bar is finished, including the end caps.
  • Contemporary design - architecturally engineered to offer one of the lowest profiles in the industry.
  • Unit is non-handed - suitable for LHR or RHR doors.




 DOWNLOADS 

Brochure for 6451 Series Exit Sensor Bar
(PDF, 335KB)

6451 Installation Manual
(PDF, 504KB)


Request Quote
Terms & Conditions  |  Privacy Policy  |  Sitemap  |  Site created by Thomas Web Solutions and powered by Navigator Platform
DynaLock Corporation