By Part Number
Electronic Locking &
Access Control Products
Price List Book
View previous campaigns.
6451 Series Exit Sensor Bar
Item # 66451-48-US28
Email This Page
Save To Favorites
Item # 66451-48-US28, 6451 Series Exit Sensor Bar
The non-latching 6451 Exit Sensor Bar offers immediate “no prior knowledge” egress by pushing on the bar at any point, with 15 Lbs. or less pressure.
A light touch is all that is required to activate one or both internal optical sensors designed to detect an exit attempt. A built-in mechanical switch is also included as a redundant back-up release.
Dual sensors, fail-safe electronics and successful testing in excess of one million cycles offer the user unparalleled reliability and low maintenance costs.
Installation is simple. Complicated tune-in procedure and frequent call-backs for readjustment are not required.
Releases an electric lock when activated by any means including:
Any other device
All models for doors with 5/8” or less frame stop. Actual bar length is 2” less than width of door x 2-3/8”H x 2-7/16”D Distance between mounting holes is 2-3/4” less than width of door.
Exit Sensor Bar
Maximum Operating Force
-10 to 120
1,000,000 Cycles Minimum
Maximum Current Draw
Removable Terminal Block
Dual Photo-optical, Mechanical Back-up
5/16” Dia. x 18” Steel Flex Cable, Less Wires
Optical sensing electronics controlling lock and signal functions have no moving parts to wear out.
Built-in redundant mechanical switch for back-up release.
No tune-in required - complicated calibration and fine tuning are unnecessary and return calls are eliminated.
Three standard bar lengths are offered - bar may be field or factory cut to suit special applications (See CLC Option).
Bar may be activated by anything - human touch, briefcase, cane, wheelchair, etc. will activate the 6451. Ideal for ADA compliant installations.
Weather resistant electronics - conformal coated circuitry resists moisture damage.
All-metal construction - the entire bar, including end caps, is made of aircraft-grade aluminum, offering high resistance to abuse and vandalism.
Armored power transfer cord - furnished standard.
Dual output standard - DPDT contacts provide lock control and alarm shunting capabilities.
Built-in spike suppression - all input/output terminals are protected from line spikes.
Variable input power - operating voltage 12 to 24 VAC/VDC.
Architectural finishes - US28 satin aluminum is standard. US10B dark bronze and US4 satin brass also available. Entire bar is finished, including the end caps.
Contemporary design - architecturally engineered to offer one of the lowest profiles in the industry.
Unit is non-handed - suitable for LHR or RHR doors.
Brochure for 6451 Series Exit Sensor Bar
6451 Installation Manual
705 Emmett Street, Bristol, CT 06010
Phone: 860.582.4761 Fax: 860.585.0338
INTEGRATED SECURITY SYSTEMS
Terms & Conditions
| Site created by
Thomas Web Solutions
and powered by